|
Model: TW-1100HV
TW-1100HV SPECIFICATIONS
Travel |
|
Table left right, X axis |
1100 mm (43") |
Saddle in and out (Y with vertical head, Z with horizontal head) |
685 mm (26.97") |
Vertical head (Z axis when in use) |
660 mm (25.98") |
Horizontal head up and down (Y axis when in use) |
660 mm (25.98") |
Table |
|
Table dimension |
630 x 630 mm (24.8" x 4.8") |
Number of T-slots |
5 |
Table height above floor |
1350 mm (53.15") |
Table load capacity |
1200 kgs (2643 lbs) |
Spindle |
|
Spindle taper (both spindle) |
#40, #50 / CAT or BT |
Spindle drive output (both spindle) |
25HP |
Spindle speed, continuous |
10000(#40) / 8000(#50) rpm |
Capacities |
|
Vertical head spindle C/L to face of column |
809 (31.85") |
Vertical head min/max spindle nose to table |
95~755 (3.74"~ 29.72") |
Horizontal spindle min/max C/L from table surface |
205 ~ 890 mm (8.07"to 35.04") |
Ball screws, pretensioned, high precision |
40 mm (1.57") x 10 mm pitch C3 |
Rapid travers rate |
30 M/min (1,181 IPM) |
Feedrate |
15 M/min (590 IPM) |
General information |
|
Floor space, L-R x F-B |
5010 x 5055 mm (197.24" x 199") |
Height to top of column |
3,740 mm (147.24") |
Machine weight |
14,500kgs (31,938 lbs) |
CNC Controller |
Fanuc 0i-MF PLUS |
All specifications and designs are subject to change without notice.